Front loaders are tools used for loading and unloading various agricultural products (beet, potato, straw, grass, etc.). The front loader consists of two arms that are hinged to the front of the tractor and a bucket attached to its leading ends. This tool is a versatile tool that can be used for long-stemmed and heavy products. The bucket can be made in different types to carry various materials.

Trailer is a wheeled non-motorized vehicle that is attached to the back of motor vehicles and is used to carry loads. These vehicles, which are attached to the drawbar behind the towing vehicles, are generally divided into two as full and semi-trailers. Since full trailers with a front axle do not load the towing vehicle, they are generally used for commercial purposes in heavy vehicles such as trucks and tractors. Since semi-trailers put a part of the load on the carrier vehicle, they are used in vehicles with less pulling force. The tractor trailer used in agricultural activities to transport grain and various crops is generally designed as a semi-trailer. Thanks to the trailer, the extra vehicle and fuel costs are eliminated. The amount of load to be transported should be determined according to the size of the trailers.

The leveling shovel is mainly used in leveling the soil and in the construction of field roads. In addition, it is possible to open roads covered with snow in winter, to clean animal shelters and to use it in leveling and filling processes of many other areas. Leveling shovel is very easy to install and change the angle settings. Also, it offers the opportunity to work at a fixed height thanks to the optional wheel system.

The feed mixer is a machine that will reduce the feeding workload of farmers and producers engaged in livestock or dairy breeding. There are different models of feed mixing machines, which reduce the work done and provide better mixing of animal feed, depending on the facility to be used. The capacity of the mixing machine should be determined according to the amount of feed is required to be mixed at once in the feed mixer machine. It will be more beneficial to determine the capacity of the feed mixer, considering the number of animals.

A plow is a tool that is attached to the back of a tractor and plows the soil. It is one of the most important equipment used in the preparation of the field for a new planting. With the tractor pulling the plow; the plow shreds the soil and turns the soil. Firstlly, the soil is loosened, it gets air, and if there is any, the weeds and stems on the soil are mixed into the soil. The plow is used during the first processing of the compacted and settled soil that has grown on it and has not been treated for a long time. The main parts of the plow are the end iron and the ear or disc region. The part called the end iron is usually made of hardened steel and its main function is to open a channel by splitting the soil while the plow moves forward. Dung is thrown to the side by the ear or disc region. For most of the plows, tilting goes to the right.

Beet harvester, is a single row dismantling machine that performs, cleaning, storage ,unloading as well as cutting leaves and heads of beets. It saves time by ensuring that harvesting and cleaning are done at the same time. It also makes it possible to bring beets to the market as fresh and less damaged.

The cultivator is a tool that is generally used in processes such as raising the soil, airing it, breaking the clods and cultivating the soil without toppling it. The cultivator also can be used for plucking and cutting the roots of weeds, covering sprinkled seeds and fertilizers, and sometimes for stubble and land leveling.

Spraying machines throw the chemicals used on the plant parts (leaves, branches, fruits) in order to protect the plants from damage and diseases. Sprayers, fall into 3 groups depending on the power source they are used as hand-operated, tractor-operated and aircrafts-operated. In addition, according to the condition of the chemical thrown; sprayer machines are divided into liquid drug dispensers and solid medicine dispensers (pollinators). Liquid sprayers are divided into 3 types as sprayers, atomizers and foggers according to the size of the liquid drug droplets they spray.

Precision sowing machines are used to sow seeds at fixed sowing depths at certain distances between rows. It is used in the cultivation of crops such as irregular, indented protrusions, especially like sugar beet; very small and light like lettuce; legumes such as beans, chickpeas, lentils and corn, sunflower etc.

Balers are machines that collect and squeeze many materials such as green feed, stubble, various animal feed, cereal stems from the field in scattered form or in barrels, and tie them with rope or wire and make bales. Baling is actually the packaging of grass, straw, straw or green feed. Balers pulled by a tractor take their movement either from the power take off or the motor on them. In balers that take their motion from the tail shaft and are pulled with a tractor, the tractor must be strong enough since the tractor will both operate the baler and pull the baler.

Disc harrows are primarily used for soil tillage, shallow tillage, seed bed preparation, weed control and mineral fertilizer, farm manure, compost, seed etc. mixing products into the soil; It is used for purposes such as breaking the cream layer, duplication-tripling, mixing the surface residues remaining on the soil surface after the harvest of the previous product into the soil by partially breaking it up.

Disc field mowers and alfalfa mowers are used to mow and leave crops such as alfalfa and vetch in the field. Some machines are produced as suspended models, while others are produced as disc towed models. Damage to the root of the plant due to the rotational movement of drum mowers does not occur in disc mowers. In disc mowers, thanks to the rubber squeezing rollers, the cut grass is notched by crushing (without cutting) so that the herb dries faster without losing its nutritional values.

Casting rollers are used to press the soil, crush the clods that cannot be broken up with tillage tools, and smooth the field surface. Suspended and towed rollers are generally used in small parcels. Rolls can be used before and after planting seeds. Before planting, it presses the soil by breaking the clods of the cultivated field and a balance is provided between the air gaps, and the water and air ratio of the soil is regulated and a good seed bed is prepared. After planting, it helps to increase the relationship of the seeds with the soil and to bring the water in the lower floors closer to the area where the seeds are located, thus helping to germinate.

Seed drill machine is an agricultural tool used for seeding. It consists of a wheel and a seed hopper that can be pulled with a tractor or other tractor. It is an important agricultural machine used to throw the desired amount of seed in a homogeneous distribution to the soil to a certain depth.

Fertilizer spreaders are used for spreading the fertilizer on the soil and distributing it homogeneously. The fertilizer spreader is produced in two types: double disc, hydraulic controlled, driven from the tail shaft, hanging type and trailed type. The fertilizer spreader can be transported very easily to the field, and the need for a second tractor for fertilizer transport is reduced in machines with high storage capacity.

The tanker is designed to carry water, transfer it with the help of a pump and irrigate when needed. The water tank is made of elliptical, cylindrical or "D" section in appropriate thickness sheet metal or stainless steel. There is a level indicator showing the amount of water on the tank.

The animal water bowl is a tool that meets the water needs of livestock. Cattle and sheep should have access to fresh, clean and sufficient water at all times. Water bowls, which can be produced from iron-cast enamel and aqua plastic, have models with heating against cold effects and freezing in winter.

Spiral conveyor is the equipment that enables the movement of powder and granular fluids in the pipe or vessel with the mechanical rotation movement and is used for the transportation of products such as grains and seeds in short distances.

Disc harrow is a type of agricultural tool that belongs to the rake group and is used in soil processing. It is used in stubble, in preparing seed beds, in chopping organic materials such as stalk and green grass on the soil. It is used in the fight against fast growing green grasses especially in the rainy seasons.

The hay harvesting harrow is a machine that provides the spreading, turning, gathering and barreling of weeds in order to facilitate the collection and baling of cut stalks, alfalfa, grass, meadow and similar forage plants.